PENINGKATAN MUTU LABORATORIUM UJI DAN KALIBRASI IBBN MELALUI UJI PROFISIENSI / UJI BANDING SESUAI PERSYARATAN ISO/IEC 17025:2017

Authors

  • Zaidi Oktari Badan Riset dan Inovasi Nasional (BRIN)
  • Masripah
  • Septi Septi Rizkine Pramukti
  • Mustika Fadila

DOI:

https://doi.org/10.25078/jpm.v9i01.1408

Keywords:

Proficiency Testing, Interlaboratory Testing, Scopes

Abstract

ISO /IEC 17025:2017 requires all accredited laboratories to take part in proficiency and interlaboratory testing activities. This research discussed the evaluation of the Nuclear Fuel Installation (IBBN) Laboratory’s participation in proficiency and interlaboratory testing within the last 3 years. The research was carried out by monitoring the achieved target and quality goals, monitoring the numbers of scope/equipment that had taken a part in proficiency and interlaboratory testing, then examining the existing problem by finding the root cause using the fishbone method, and providing some recommendations for improvement and preventive action. Based on 2019-2021 data, quantitatively speaking, the participation of IBBN in proficiency and interlaboratory testing has met the quality goals, which is 2 scopes/equipment per year. However, in general, the percentage of IBBN participation is still low, only 43% or only 6 scopes from 14 total scopes which already taken part. Recommended improvements include the identification of other laboratories outside Ind with the same scope, management’s commitment for funding support, and funding support, as well as increasing personnel competencies related to proficiency and interlaboratory testing.

Downloads

Download data is not yet available.

References

Faridah, D. N., Erawan, D., Sutriah, K., Hadi, A., & Budiantari, F. (2018). Implementasi SNI ISO/IEC 17025:2017 Persyaratan Umum Kompetensi Laboratorium Pengujian dan Kalibrasi (I). Badan Standardisasi Nasional.

Fatchiyah. (2017). Modul Bimtek Bioengineering Manajemen Laboratorium

Gaspersz, V. (2000). Manajemen produktivitas total. Jakarta: Gramedia Pustaka Utama.

Hadi Anwar, dkk. (2017). Persyaratan Umum Kompetensi Laboratorium Pengujian dan Kalibrasi SNI ISO/IEC 17025:2017. Standar Nasional Indonesia.

Harjito. (2019). Evaluasi Uji Banding Antar Laboratorium untuk Mengukur Kompetensi Personil. INDONESIAN JOURNAL OF LABORATORY, 2(1), 29–33.

Hayu, R., & Ismail, Z. (2015). Penentuan Nilai Acuan Uji Banding Antar Laboratorium Kalibrasi untuk Kalibrasi Mikropipet. Jurnal Standardisasi, 17(3), 199–206.

Komite Akreditasi Nasional. (2005). Kebijakan KAN Mengenai Uji Profisiensi. DPLP 11, 1–6.

Nauval, M., Balai, F., Logam, B., Mesin, D., & Perindustrian, K. (2017). Uji Banding Antar Laboratorium Untuk Reference Multimeter Dalam Menjamin Standar Mutu Laboratorium Kalibrasi. In METAL INDONESIA Journal homepage (Vol. 39, Issue 2). http://www.jurnalmetal.or.id/index.php/jmi

Pusat Teknologi Bahan Bakar Nuklir. (2020). Rencana Strategis PTBBN 2020-2024. BATAN.

Styarini, Dyah (2010). Uji Profisiensi Laboratorium. Warta Kimia Analitik No. 18 Tahun XV.

Tjahyo Eka, N. D., Ridwan Nugraha, A., Qiyaman, D., & Ardi Rahman, dan. (2018). Menyoal Urgensi Uji Profisiensi Nanometrologi Dimensi di Indonesia. Instrumentasi, 42(1), 35–48.

Tranggono, M. (2006). Pengaruh Penerapan ISO/IEC 17025:2005 terhadap kompetensi Laboratorium Pengujian Balai Bahan Perkerasan Jalan di Bandung. Jurnal Jalan - Jembatan, 23(3), 87–101.

Published

2023-02-28

Issue

Section

Articles
Abstract viewed = 484 times