Evaluasi Ketercapaian Standar Penjaminan Mutu Penelitian Di Program Studi D3 Mesin Otomotif Universitas Muhammadiyah Magelang Dengan Metode Indeks
DOI:
https://doi.org/10.25078/jpm.v4i1.397Keywords:
research performace, publication performance, IP-PS, IPub-PSAbstract
In the past decade, the general method for measuring the performance of research and scientific publications in a Study Program at a Higher Education is by the Rough Value (Nilai Kasar, NK) calculated per three years. This value is derived from the accreditation instrument. In fact, the calculation of the performance of research and scientific publications with NK cannot represent an annual performance. Therefore, this paper presents a new method for calculating research and scientific publications performance with an index (IP-PS and IPub-PS), which is calculated annually. An example of quality measurement practice in the Automotive Diploma Program of Universitas Muhammadiyah Magelang. As a result, calculations with IP-PS and IPub-PS are more likely to present real conditions per year than using NK.
Downloads
References
DRN. (2016). Agenda Riset Nasional 2016-2019. Jakarta: Dewan Riset Nasional.
Fahmi, L., & Setiyo, M. (2015). Effect of ethanol blend on corrosion rate of fuel tank (original: Pengaruh campuran ethanol pada laju korosi tangki bahan bakar). In Semnastek (pp. 1–6). Jakarta: Fakultas Teknik Universitas Muhammadiyah Jakarta. Retrieved from jurnal.ftumj.ac.id/index.php/semnastek
Kemenristekdikti. Peraturan Menteri Riset, Teknologi, dan Pendidikan Tinggi Republik Indonesia No. 44 Tahun 2015 (2015). Indonesia.
Munahar, S., Rusdjijati, R., Purnomo, T. A., & Hidayati, L. L. A. (2017). Perancangan Mesin Perajang Kerupuk dan Kulit Ikan Guna Meningkatkan Produktivitas Kerja Pengrajin Produk Ikan. In The 6th URECOL (pp. 39–44). Magelang: Universitas Muhammadiyah Magelang. Retrieved from http://journal.ummgl.ac.id/index.php/urecol/article/view/1565/678
Munahar, S., & Setiyo, M. (2017). AFR Modeling of EFI Engine Based on Engine Dynamics, Vehicle Dynamics, and Transmission System. Jurnal Teknik Mesin, 7(1), 21–29. http://doi.org/http://dx.doi.10.21063/JTM.2017.V7.20-29
Munahar, S., Setiyo, M., Purnomo, B. C., & Aman, M. (2017). Karakteritik Linearization System Dan Data Acqusition Pada Pengembangan Engine Control Unit- ( ECU ) Pada EFI Engine. In The 6th URECOL (pp. 21–26). Magelang: Universitas Muhammadiyah Magelang. Retrieved from http://journal.ummgl.ac.id/index.php/urecol/article/view/1532/853
Munahar, S., Triwiyatno, A., & Setiawan, J. D. (2015). Strategi Peningkatan Model Air To Fuel Ratio (AFR) dan Brake Control System Pada Mesin Bensin. In Seminar Nasional Perkembangan Riset dan Teknologi dibidang Industri ke - 21. Yogyakarta: Universitas Gadjah Mada.
Purnomo, B. C., & Setiyo, M. (2017). Karakteristik sistem refrigerasi kompresi uap dengan refrigerant campuran musicool 134 - CO2. Jurnal Teknologi, 9(2). http://doi.org/DOI: https://dx.doi.org/10.24853/jurtek.9.2.57-64
Purnomo, B. C., Widodo, W., Munahar, S., Setiyo, M., & Waluyo, B. (2017). Karakteristik Emisi Gas Buang Kendaraan Berbahan Bakar LPG untuk Mesin Bensin Singke Piston. In The 6th URECOL (pp. 7–12). Magelang: Universitas Muhammadiyah Magelang. Retrieved from http://journal.ummgl.ac.id/index.php/urecol/article/view/1601/849
Primayana, K. H. (2016). MANAJEMEN SUMBER DAYA MANUSIA DALAM PENINGKATAN MUTU PENDIDIKAN DI PERGURUAN TINGGI. Jurnal Penjaminan Mutu, 1(2), 7-15.
Rusdjijati, R., Setyo, S., Sugiarto, A., & Raliby, O. (2016). Unsafety Behaviour Pekerja di Industri Kayu Lapis yang Berpotensi Menyebabkan Kecelakaan Kerja. In IENACO. Solo: Universitas Muhamamdiyah Surakarta. Retrieved from https://publikasiilmiah.ums.ac.id/handle/11617/8678
Saifudin, Munahar, S., & Khusaeni, D. A. (2016). Perilaku inhibitor korosi pada radiator. Flywheel, II(November). Retrieved from http://jurnal.untirta.ac.id/index.php/jwl/article/view/1360/1082
Saifudin, Sutoyo, Malau, V., & Iswanto, P. T. (2015). Karakterisasi mekanis dan fisis lapisan diamond-like carbon (DLC) dengan teknik plasma assisted chemical vapor deposition (PACVD) pada permukaan tool steel HSS. In The 2nd URECOL (pp. 24–29). Semarang: Universitas Muhammadiyah Semarang.
Setiyo, M. (2017a). Listrik & Elektronika Dasar Otomotif (Basic Automotive Electricity and Electronics). (A. Burhanudin, Ed.). Magelang: UNIMMA Press.
Setiyo, M. (2017b). Teknik Menyusun Manuskrip dan Publikasi Ilmiah Internasional. (B. Waluyo, Ed.). Yogyakarta: Deepublish.
Setiyo, M., & Munahar, S. (2017). AFR and fuel cut-off modeling of LPG-fueled engine based on engine, transmission, and brake system using fuzzy logic controller (FLC). Journal of Mechatronics, Electrical Power, and Vehicular Technology, 8, 50–59. http://doi.org/10.14203/j.mev.2017.v8.50-59
Setiyo, M., Munahar, S., Triwiyatno, A., & Setiawan, J. D. (2017). Modeling of deceleration Fuel cut-off for LPG fuelled engine using Fuzzy logic controller. International Journal of Vehicle Structures and Systems, 9(4). http://doi.org/10.4273/ijvss.9.4.12
Setiyo, M., Saifudin, Purnomo, B. C., Waluyo, B., & Ramadhan, A. I. (2017). Temperature Distribution of R-134a Through Aluminum and PTFE Expansion Valve on Automotive Air Conditioning Applications. ARPN Journal of Engineering and Applied Sciences, 12(4), 1046–1051. Retrieved from http://www.arpnjournals.org/jeas/research_papers/rp_2017/jeas_0217_5723.pdf
Setiyo, M., Soeparman, S., Hamidi, N., & Wahyudi, S. (2016). Techno-economic analysis of liquid petroleum gas fueled vehicles as public transportation in Indonesia. International Journal of Energy Economics and Policy, 6(3), 495–500.
Setiyo, M., Soeparman, S., Hamidi, N., & Wahyudi, S. (2017a). Characteristic of LPG compositions in the fuel line during discharging process. International Journal of Technology, 8(1). http://doi.org/10.14716/ijtech.v8i1.4117
Setiyo, M., Soeparman, S., Hamidi, N., & Wahyudi, S. (2017b). Cooling effect characteristics of a ½ cycle refrigeration system on an LPG fuel system. International Journal of Refrigeration, 82. http://doi.org/10.1016/j.ijrefrig.2017.06.009
Setiyo, M., Soeparman, S., Wahyudi, S., & Hamidi, N. (2016). A simulation for predicting potential cooling effect on LPG-fuelled vehicles. In AIP Conference Proceedings (Vol. 30002, p. 30002). American Institute of phisics. http://doi.org/10.1063/1.4943426
Setiyo, M., Soeparman, S., Wahyudi, S., & Hamidi, N. (2018). The Alternative Way to Drive the Automobile Air-Conditioning, Improve Performance, and Mitigate the High Temperature: A Literature Overview. Periodica Polytechnica Transportation Engineering, 46(1), 36–41. http://doi.org/https://doi.org/10.3311/PPtr.8892
Setiyo, M., Waluyo, B., Anggono, W., & Husni, M. (2016). Performance of Gasoline/LPG Bi-Fuel Engine of Manifold absolute Pressure Sensor (MAPS) Variations Feedback. ARPN Journal of Engineering and Applied Sciences, 11(7), 4707–4712. Retrieved from http://www.arpnjournals.org/jeas/research_papers/rp_2016/jeas_0416_4012.pdf
Setiyo, M., Waluyo, B., Husni, M., & Karmiadji, D. W. (2016). Characteristics of 1500 CC LPG fueled engine at various of mixer venturi area applied on Tesla A-100 LPG vaporizer. Jurnal Teknologi. http://doi.org/10.11113/jt.v78.7661
Setiyo, M., Waluyo, B., Purnomo, B. C., Munahar, S., & Setyawan, I. C. (2017). Studi Numerik : Efek Perubahan Komposisi LPG terhadap Energy Delivery pada Spark Ignition ( S . I .) Engine. In The 6th URECOL (pp. 17–20). Magelang: Universitas Muhammadiyah Magelang. Retrieved from http://journal.ummgl.ac.id/index.php/urecol/article/view/1534
Triwiyatno, A., Sinuraya, E. W., Setiawan, J. D., & Munahar, S. (2016). Smart controller design of air to fuel ratio (AFR) and brake control system on gasoline engine. In ICITACEE 2015 - 2nd International Conference on Information Technology, Computer, and Electrical Engineering (pp. 233–238). http://doi.org/10.1109/ICITACEE.2015.7437805
Waluyo, B., Condro, B., & Saifudin, H. (2015). Penggunaan berbagai jenis filter pada oil catch tank untuk perbaikan performansi mesin old vehicle. In Semnastek (pp. 1–4). Jakarta: FAkultas Teknik Universitas Muhammadiyah Jakarta. Retrieved from https://jurnal.umj.ac.id/index.php/semnastek/article/view/472
Waluyo, B., & Saifudin. (2016). Performance of SI Engine at Various of Oil Catch Tank Filter Materials. International Journal of Innovative Research in Science, Engineering and Technology, 5(11), 18812–18818. http://doi.org/10.15680/IJIRSET.2016.0511002
Waluyo, B., Wardana, I. N. G., Yuliati, L., & Sasongko, M. N. (2018). The role of molecule cluster on the azeotrope and boiling points of isooctane-ethanol blend. Fuel, 215(September 2017), 178–186. http://doi.org/10.1016/j.fuel.2017.10.103
Widiyanto, A., & Munahar, S. (2016). Key-less Automatic Lock System using RFID & Smartphone. In ICETIA (pp. 5–11). Solo.
